Prop-firm evaluation + funded accounts
MT5 to TradeLocker Trade Copier
Copy MT5 trades onto TradeLocker followers, where each broker sets how its account holds positions.
- No VPS, no EA
- Runs 24/7 in the cloud
- Copies sent as soon as a fill arrives
- Run and stop it from your phone
Free trial on cTrader and TradeLocker · 1 week · up to 3 accounts · no card
The week starts when your first account connects.
How do I copy MT5 trades to a TradeLocker account?
Create a repeater with the MT5 account as the source account and the TradeLocker account as the follower account, remap the names that differ, and press Run.
A mode at both ends.MT5 is hedging or netting, and a TradeLocker broker sets how its own accounts hold positions.
Ask the broker.A netting follower merges same-symbol copies into one position, so check before you scale in.
Names differ by broker.Trepeat proposes the follower's name from its own symbol list, and you confirm it.
Sized to the follower's step.Minimum and step are read from the follower's broker and each copy is snapped to them.
More about the MT5 to TradeLocker Trade Copier
An MT5 source can drive TradeLocker followers, and the copy is simple while both accounts hold positions the same way. That is the thing to check. An MT5 account is hedging or netting, set when the broker made it, and a TradeLocker account holds positions the way its broker set up the account. A netting account merges same-symbol positions into one, so a copy stops being exact from the second one on a symbol. Currently demo accounts only: prop-firm evaluation and funded accounts usually run on demo accounts, and where the firm issues yours as a TradeLocker demo account, that is what Trepeat connects. Live real-capital accounts aren't supported.
- Account mode is the broker's choice
- MT5 reports its margin mode to any client that asks, and Trepeat flags a netting MT5 account on the Accounts page. How a TradeLocker account holds positions is set by its broker, so ask yours before you rely on a copy being position for position. A netting follower merges same-symbol copies into one position.
- Names differ between the two brokers
- MT5 brokers write instruments their own way and TradeLocker brokers add endings of theirs, so one instrument can be two strings. Trepeat reads each account's symbol list when you add it and proposes the follower's name when you create a remapping. You confirm it.
- Lots snapped to the follower's step
- Both platforms size in lots. The repeater's rule produces a lot size, which is snapped to the follower symbol's step, with anything below its minimum skipped. Minimum and step are read from the follower's broker.
- Built for evaluation + funded accounts
- Prop-firm evaluation and funded accounts usually run on demo accounts (MetaTrader demo servers, or a cTrader or TradeLocker demo account where the firm issues one), which is exactly what Trepeat currently connects. Run your evaluations and funded accounts side by side, each repeater with its own sizing and symbol rules. A challenge placed on a live account can't be connected either way. We don't share data with prop firms or read their evaluation rules.
Dashboard: Live status, P&L, and per-account performance at a glance.


Accounts: The sources you copy from and the followers you copy to.


Repeaters: Sizing per repeater, symbol allowlists, and one-click Run / Stop.


Trades: Every copied execution with latency, outcome, and live P&L.


Journal: Tag your setups, rate execution, and review your edge.


How it works
Set it up once and every trade repeats on its own, sized by the rules you set. More on multi-account copying →
- Connect your accountsBroker login or cTrader ID
- Set up a repeaterSource, followers, sizing. Press Run
- Trade from anywhereDesk or phone
Any platform to any platform. Mix MT4, MT5, cTrader and TradeLocker followers under one source.
Sized and matched per account. Lots follow each account's equity or your multiplier; broker symbol names are remapped once.
Maximum lot per order. One cap per repeater: no single copy is bigger than you allow.
Alerts that reach you. In-app for every event; email when an account stays disconnected or copies keep failing.
Live P&L and journal. Every account's results in one place, with notes on each setup.
Closes checked. A follower that misses a close while offline raises an alert on reconnect. Flatten closes the source trade and every copy of it. Trades Trepeat isn't copying are never touched.
What each number means
Any platform to any platform. Mix MT4, MT5, cTrader and TradeLocker followers under one source.
Sized and matched per account. Lots follow each account's equity or your multiplier; broker symbol names are remapped once.
Maximum lot per order. One cap per repeater: no single copy is bigger than you allow.
Alerts that reach you. In-app for every event; email when an account stays disconnected or copies keep failing.
Live P&L and journal. Every account's results in one place, with notes on each setup.
Closes checked. A follower that misses a close while offline raises an alert on reconnect. Flatten closes the source trade and every copy of it. Trades Trepeat isn't copying are never touched.
Fast, always on, out of your way.
The engine runs around the clock in the cloud, so your PC can be off and your phone is all you need.
Real time
Pushed, not polled
Fills reach Trepeat over a live stream from each MetaTrader, cTrader and TradeLocker connection, and the order goes to every follower as soon as the fill arrives. Each follower's broker still sets its own execution time.
24/7
Always-on engine
Runs on AWS, not your computer. No VPS to rent, no EA to install.
30 s
Uptime probes
The site and app are checked every 30 seconds from several AWS regions, and the engine is watched by alarms around the clock.
Broker passwords encrypted
Kept in an encrypted vault and never sent to your browser. cTrader connects through its official sign-in, so Trepeat never sees that password at all.
Only copied trades are touched
Flatten closes the source trade and every copy of it. Trades Trepeat isn't copying are never touched.
Infrastructure we use
Recently shipped · Changelog →
- 4.0.0 · 10 Nov: TradeLocker joins MT4, MT5 and cTrader
- 3.4.0 · 5 Nov: The free trial starts at your first connected account
- 3.3.2 · 4 Nov: A Tools page, five calculators and five guides
Pricing
Everything included.
Pay only for the accounts you connect.
One price per account, the same on MT4, MT5, cTrader and TradeLocker. Your source and each follower count as one account each. No plans, no add-ons, no feature tiers. How pricing and the trial work →
- Unlimited repeaters
- MT4, MT5, cTrader, TradeLocker, any direction
- Lot sizing per repeater
- Maximum lot per order
- Symbol remapping
- Symbol allowlist
- Missed-close checks
- Flatten all copied trades
- Email and in-app alerts
- Live P&L and dashboard
- Trade journal
- Excel export
- Two-factor sign-in
- Phone and desktop
- No VPS, no EA
- Billed per account, add or remove any time
- Support tickets
- Unlimited repeaters
- MT4, MT5, cTrader, TradeLocker, any direction
- Lot sizing per repeater
- Maximum lot per order
- Symbol remapping
+ 12 more, all included
- Symbol allowlist
- Missed-close checks
- Flatten all copied trades
- Email and in-app alerts
- Live P&L and dashboard
- Trade journal
- Excel export
- Two-factor sign-in
- Phone and desktop
- No VPS, no EA
- Billed per account, add or remove any time
- Support tickets
Accounts
Minimum 2: a source and a follower
$30per month
$15 per account per month
Tax included
Free trial on cTrader and TradeLocker · 1 week, up to 3 accounts, no card
Mix them as you like: copy a cTrader account to a TradeLocker one.
MT4 and MT5 connect as soon as you subscribe.
MT5 to TradeLocker Trade Copier: common questions
How can I tell whether a TradeLocker account hedges or nets?
Ask the broker, or open a second position in a symbol you already hold: two positions means hedging, one larger position means netting. A netting follower merges same-symbol copies from the second one on.
What does a netting MT5 source change?
A netting source reports one merged position per symbol, and that is the shape the followers see. Check the mode on both ends before you scale in.
Is anything needed inside the MT5 terminal?
No. The MT5 account goes in from the Accounts page with its server, login and password. Nothing is installed in either terminal.
All questions The rest (pricing, the trial, copying and safety) are in the Help Centre. Still stuck? Email support@trepeat.com.
Trade once. Repeat everywhere.
Free trial on cTrader and TradeLocker · 1 week · up to 3 accounts · no card
The week starts when your first account connects.
MT4 and MT5 connect as soon as you subscribe.
Related copiers
- Prop Firm Trade Copier
- MetaTrader Trade Copier
- MetaTrader 4 Trade Copier
- MetaTrader 5 Trade Copier
- Forex Trade Copier
- Account Copier
- Multi-Account Trade Copier
- cTrader Trade Copier
- Cloud Trade Copier, No VPS
- Hedging Trade Copier
- Scalping Trade Copier
- MT4 to MT5 Trade Copier
- MT4 to cTrader Trade Copier
- MT5 to cTrader Trade Copier
- cTrader to MT4 Trade Copier
- cTrader to MT5 Trade Copier
- cTrader to cTrader Trade Copier
- MT4 to MT4 Trade Copier
- MT5 to MT4 Trade Copier
- MT5 to MT5 Trade Copier
- TradeLocker Trade Copier
- MT4 to TradeLocker Trade Copier
- TradeLocker to MT4 Trade Copier
- TradeLocker to MT5 Trade Copier
- cTrader to TradeLocker Trade Copier
- TradeLocker to cTrader Trade Copier
- TradeLocker to TradeLocker Trade Copier
