Skip to main content

Prop-firm evaluation + funded accounts

Hedging Trade Copier

A hedging copier keeps one follower position per source position, never merged, on MT4, MT5, cTrader and TradeLocker.

  • No VPS, no EA
  • Runs 24/7 in the cloud
  • Copies sent as soon as a fill arrives
  • Run and stop it from your phone

Free trial on cTrader and TradeLocker1 week · up to 3 accounts · no card

The week starts when your first account connects.

How does a trade copier handle a hedging account?

It opens one follower position for every source position and closes each one with its own, so nothing is merged.

  • One follower position per source position.Three EURUSD trades on the source mean three on the follower, each closing with its own.

  • Partial closes stay matched.They repeat proportionally against that position, not against the symbol as a whole.

  • Netting followers flagged when it counts.The alert fires as a copy is about to stack on a symbol that account already holds.

  • “Hedging” is the account mode, not a strategy.Trepeat repeats your source in the same direction and never opens a position it did not take.

Prop firm rules on hedging are about opposite positions across accounts, not the account mode: see prop firm hedging rules across accounts.

More about the Hedging Trade Copier

Most MetaTrader, cTrader and TradeLocker accounts run in hedging mode, where a second trade on a symbol you already hold opens a second position instead of reducing the first. Trepeat is built that way throughout: it tracks one follower position per source position, so closing one source trade closes the copy that belongs to it and nothing else. Netting accounts work differently, and Trepeat tells you at the moment it starts to matter rather than at setup time. Evaluation and funded accounts usually run on demo accounts (MetaTrader demo servers, or a cTrader or TradeLocker demo account where the firm issues one), which is what Trepeat currently connects; a challenge placed on a live account can't be connected either way.

One position per source position
Every copy is tracked against the exact source position it came from, on every platform. Open three trades on EURUSD and the follower holds three, each closing with its own source, including partial closes, which repeat against that position rather than the symbol as a whole, sized by the repeater's rule. A partial too small for the follower's minimum closes the whole copy.
Netting followers are flagged when it counts
A netting account merges same-symbol positions instead of opening a second, so the follower's exposure stops matching the source. A setup-time warning can only say the account is netting; Trepeat raises it the moment a copy is about to land on a symbol that account already holds, which is the point at which it actually breaks.
Symbol remapping
Brokers name the same instrument differently: EURUSD on one, EURUSD.r on another, EURUSDm on a third. Set a remap once and every later fill uses it. Point it at all followers, or at ONE named follower when two brokers disagree, which is the case an all-follower rule cannot express, because it can only offer a name every follower carries.
Per-repeater risk config
Each repeater sets one risk profile (multiplier or equity-ratio sizing, max-volume cap and symbol allowlist) applied to all its followers, while a symbol remap can target all followers or one. Equity-ratio sizing auto-scales each follower to its account size, so one source can drive a large funded account and a small demo account from the same strategy.
Built for evaluation + funded accounts
Prop-firm evaluation and funded accounts usually run on demo accounts (MetaTrader demo servers, or a cTrader or TradeLocker demo account where the firm issues one), which is exactly what Trepeat currently connects. Run your evaluations and funded accounts side by side, each repeater with its own sizing and symbol rules. A challenge placed on a live account can't be connected either way. We don't share data with prop firms or read their evaluation rules.

Dashboard: Live status, P&L, and per-account performance at a glance.

Trepeat Dashboard page on a phone

How it works

Set it up once and every trade repeats on its own, sized by the rules you set. More on multi-account copying →

  1. Connect your accountsBroker login or cTrader ID
  2. Set up a repeaterSource, followers, sizing. Press Run
  3. Trade from anywhereDesk or phone
What each number means

Any platform to any platform. Mix MT4, MT5, cTrader and TradeLocker followers under one source.

Sized and matched per account. Lots follow each account's equity or your multiplier; broker symbol names are remapped once.

Maximum lot per order. One cap per repeater: no single copy is bigger than you allow.

Alerts that reach you. In-app for every event; email when copying stops, a copy fails, or a position needs you.

Live P&L and journal. Every account's results in one place, with notes on each setup.

Closes checked. A follower that misses a close while offline raises an alert on reconnect. Flatten closes the source trade and every copy of it. Trades Trepeat isn't copying are never touched.

Fast, always on, out of your way.

The engine runs around the clock in the cloud, so your PC can be off and your phone is all you need.

Real time

Pushed, not polled

Fills reach Trepeat over a live stream from each MetaTrader, cTrader and TradeLocker connection, and the order goes to every follower as soon as the fill arrives. Each follower's broker still sets its own execution time.

24/7

Always-on engine

Runs on AWS, not your computer. No VPS to rent, no EA to install.

30 s

Uptime probes

The site and app are checked every 30 seconds from several AWS regions, and the engine is watched by alarms around the clock.

Broker passwords encrypted

Kept in an encrypted vault and never sent to your browser. cTrader connects through its official sign-in, so Trepeat never sees that password at all.

Only copied trades are touched

Flatten closes the source trade and every copy of it. Trades Trepeat isn't copying are never touched.

Infrastructure we use

  • AWS · runs the copy engine and the site
  • MetaApi · connects MetaTrader accounts
  • Supabase · database and sign-in
  • Stripe · payments
  • Cloudflare · DNS and bot protection

Recently shipped · Changelog →

  • 4.1.2 · 13 Nov: Signing in to TradeLocker no longer locks you out after a few typos, and a repeater's History lists its activity again.
  • 4.1.1 · 12 Nov: Each repeater sets how late a copy may be, MetaTrader rides out bursts and provider outages, and sign-up holds still.
  • 4.1.0 · 11 Nov: Copy problems emailed, and prop-firm framing

Pricing

Everything included.
Pay only for the accounts you connect.

One price per account, the same on MT4, MT5, cTrader and TradeLocker. Your source and each follower count as one account each. No plans, no add-ons, no feature tiers. How pricing and the trial work →

  • Unlimited repeaters
  • MT4, MT5, cTrader, TradeLocker, any direction
  • Lot sizing per repeater
  • Maximum lot per order
  • Symbol remapping
+ 12 more, all included
  • Symbol allowlist
  • Missed-close checks
  • Flatten all copied trades
  • Email and in-app alerts
  • Live P&L and dashboard
  • Trade journal
  • Excel export
  • Two-factor sign-in
  • Phone and desktop
  • No VPS, no EA
  • Billed per account, add or remove any time
  • Support tickets

Accounts

Minimum 2: a source and a follower

2

$30per month

$15 per account per month

Tax included

MetaTrader 4MetaTrader 5cTraderTradeLocker
Start free trial

Free trial on cTrader and TradeLocker · 1 week, up to 3 accounts, no card

Mix them as you like: copy a cTrader account to a TradeLocker one.

MT4 and MT5 connect as soon as you subscribe.

Hedging Trade Copier: common questions

What is the difference between a hedging and a netting account?

On a hedging account each trade you open is its own position, so you can hold several on the same symbol at once, and in both directions. On a netting account the broker keeps one position per symbol: a second trade adds to it, reduces it, or flips it. Most MT4, MT5, cTrader and TradeLocker accounts are hedging; netting is more common on exchange-style and some institutional accounts.

Does Trepeat work if my follower account is netting?

It copies, but the match stops being exact as soon as a second copy lands on a symbol that account already holds, and the broker merges them, so one source position no longer maps to one follower position. Trepeat raises an alert at that moment and names the symbol and the repeater. If you have the choice, a hedging follower is the one to use.

Does a hedging copier open opposite trades to hedge my risk?

No. “Hedging” here is the account mode your broker runs, not a strategy Trepeat applies. Trepeat repeats what your source account does, in the same direction; it never reverses a trade or opens a position your source did not take.

Can I copy from a hedging account to accounts at different brokers?

Yes, that is the normal case. One source can drive several followers at different brokers and on different platforms, each with its own sizing and symbol rules. Where brokers spell an instrument differently, a repeater-level symbol remap handles it.

What about MT4? Does it have netting at all?

MT4 accounts are hedging, so the question only arises on MT5, cTrader and TradeLocker, where the broker decides the mode when the account is created. You can see which mode an account is in on its broker platform, and Trepeat reads it from the broker once an MT5 or cTrader account is connected. For a TradeLocker account, ask your broker.

All questions The rest (pricing, the trial, copying and safety) are in the Help Centre. Still stuck? Email support@trepeat.com.

Trade once. Repeat everywhere.

Free trial on cTrader and TradeLocker1 week · up to 3 accounts · no card

The week starts when your first account connects.

MT4 and MT5 connect as soon as you subscribe.